2.6.3 Installation
1) Make the following selections in the host machine's service mode: COPIER>FUNCTION>INSTALL>CARD;
then, enter a number (1 to 2001).
Use the lowest number of the cards that will be used by the usered.
As many as 300 cards, starting with the number you enter, will be registered.
2) Turn off the host machine's main power switch.
3) Remove the 2 screws [1], and detach the right cover (upper) [2].
[2]
F-2-130
4) Mount the card reader base [1] using the 2 included screws [2].
[1]
F-2-131
5) Route the harness [1] of the card reader through the hole [2] in the card reader base.
[1]
[2]
F-2-132
[1]
[2]
Chapter 2
0002-6753
2-39