[1]
3) Pull out the hopper supply unit [1].
- 4 screws [2]
[2]
7.9.5 Developing Motor (Bk/Y/M/C)
7.9.5.1 Before Removing the Developing Motor
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the upper rear cover. (page 10-14)[Detaching the Upper Rear
Cover]
2) Remove the lower rear cover. (page 10-15)[Detaching the Lower Rear
Cover]
3) Remove the all-night power supply PCB. (page 10-22)[Detaching the
All-Night Power Supply PCB]
4) Remove the printer power supply assembly. (page 10-18)[Detaching the
Printer Power Supply Assembly]
7.9.5.2 Removing the Developing Motor
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the developing motor [1].
- 4 screws [2]
[2]
7.9.6 Intermediate Transfer Unit
7.9.6.1 Removing the ITB Unit
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Open the front cover [1].
[2]
F-7-70
[2]
[1]
F-7-71
[1]
F-7-72
2) Press the claw [1] downward to detach the handle cover [2].
3) Press the release lever [1] to open the right cover [2].
0014-2629
For taking in/out of the process unit, make sure to do with the duplexing unit
[3] open.
[1]
0014-2628
4) Remove the 2 screws [1].
0014-1280
Chapter 7
[1]
F-7-73
[1]
[2]
F-7-74
[3]
F-7-75
[2]
7-43