Ptt Switch Panel; Power Tilt Switch; Manual Relief Valve - TOHATSU BFT 200D Owner's Manual

CONTROLS AND FEATURES

PTT Switch Panel

POWER TRIM/TILT SWITCH PANEL
TRIPLE TYPE
DUAL TYPE
POWER TRIM/TILT SWITCH
For multiple outboard motors, the
trim/tilt angle of all outboard motors
is adjusted at the same time by using
the power trim/tilt switch on the
remote control lever and the trim/tilt
angle of each outboard motor is
adjusted by using each power trim/tilt
switch on the panel.
42

Power Tilt Switch

POWER TILT SWITCH
The power tilt switch is located on the
engine pan. It is a rocker switch with
UP and DN (down) positions for
changing the angle of the outboard
motor.
The power tilt switch will operate
without turning the ignition switch
ON.
This switch is used with the engine
stopped to raise the outboard motor
for mooring, trailering, or
maintenance.

Manual Relief Valve

MANUAL RELIEF VALVE
POWER
(To hold)
The outboard motor can be tilted
manually after opening the manual
relief valve. This allows the outboard
motor to be tilted up or down when
no battery is connected.
MANUAL
(To release)