Firmware Updating With K-Pwa-Dlm-320 - Toshiba e-STUDIO2330C Service Handbook

8.3

Firmware Updating with K-PWA-DLM-320

The firmware of the equipment (scanner ROM) and the option (RADF ROM, Finisher ROM, FAX ROM)
can be updated individually by using K-PWA-DLM-320. Update the ROM data written on each board
according to the need such as the case of replacing the board.
Equipment
Scanner ROM
(Scanner firmware)
Options
Model name
Reversing Automatic Document
Feeder (RADF)
(MR-3018)
Finisher
(MJ-1101)
Saddle Stitch Finisher
(MJ-1030)
Hanging Finisher
(MJ-1031)
Hole Punch Unit
(MJ-6101)
Fax Unit
(GD-1250)
K-PWA-DLM-320
Important:
Pay attention to the direction of the ROM.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Firmware
Firmware
RADF firmware
Finisher firmware
Converter firmware
Finisher firmware
Saddle stitcher firmware
Finisher firmware
Hole punch unit firmware
Fax unit firmware
Connector Mark for ROM
installation direction
Fig. 8-14
8 - 31
Stored
Scanning section control PC
board
(SLG board)
Stored
RADF control PC board
Finisher control PC board
Converter PC board
Finisher control PC board
Finisher control PC board
Hole punch control PC board
FAX board
LED
ROM
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
8