Firmware Updating With K-Pwa-Dlm-320 - Toshiba e-STUDIO205L Service Handbook

8.3

Firmware Updating with K-PWA-DLM-320

The firmware of the equipment (engine ROM, scanner ROM) and the option (RADF ROM, Finisher
ROM, FAX ROM) can be updated individually by using K-PWA-DLM-320. Update the ROM data written
on each board according to the need such as the case of replacing the board.
Equipment
Scanner ROM
(Scanner firmware)
Options
Model name
Reversing Automatic Document
Feeder (RADF)
(MR-3021/3022)
Hole Punch Unit
(MJ-6101)
Finisher
(MJ-1025)
Saddle Stitch Finisher
(MJ-1024)
Finisher
(MJ-1101)
Hanging Finisher
(MJ-1031)
Fax Unit
(GD-1250)
K-PWA-DLM-320
Important:
Pay attention to the direction of the ROM.
e-STUDIO205L/255/305/355/455
FIRMWARE UPDATING
Firmware
Firmware
RADF firmware
Hole punch unit firmware
Finisher firmware
Finisher firmware
Saddle stitcher firmware
Finisher firmware
Converter firmware
Finisher firmware
Fax unit firmware
Connector Mark for ROM
installation direction
Fig. 8-18 Jig board: K-PWA-DLM-320
8 - 24
Stored
Scanning section control PC
board
(SLG board)
Stored
RADF control PC board
Hole punch control PC board
Finisher control PC board
Finisher control PC board
Finisher control PC board
Converter PC board
Finisher control PC board
FAX board
LED
ROM
© 2009 TOSHIBA TEC CORPORATION All rights reserved