Firmware Updating With K-Pwa-Dlm-320 - Toshiba e-STUDIO6520C Service Handbook

8.3

Firmware Updating with K-PWA-DLM-320

The firmware of the equipment (scanner ROM) and the option (RADF ROM, Finisher ROM, FAX ROM)
can be updated individually by using K-PWA-DLM-320. Update the ROM data written on each board
according to the need such as the case of replacing the board.
Equipment
Scanner ROM
(Scanner firmware)
Reversing Automatic Document Feeder (RADF)
(RADF firmware)
Options
Model name
Finisher
(MJ-1103)
Saddle Stitch Finisher
(MJ-1104)
Hole Punch Unit
(MJ-6102)
Fax Unit
(GD-1270)
K-PWA-DLM-320
Important:
Pay attention to the direction of the ROM.
e-STUDIO5520C/6520C/6530C
FIRMWARE UPDATING
Firmware
Firmware
Finisher firmware
Converter firmware
Finisher firmware
Saddle stitcher firmware
Converter firmware
Hole punch unit firmware
Fax unit firmware
Connector Mark for ROM
installation direction
Fig. 8-26 Jig board: K-PWA-DLM-320
8 - 32
Scanning section control PC
board
(SLG board)
RADF control PC board
(RADF board)
Finisher control PC board
LGC board
Finisher control PC board
Saddle stitcher PC board
LGC board
Hole punch control PC board
FAX board
LED
ROM
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
Stored
Stored