Firmware Updating With Download Jig - Toshiba e-STUDIO520 Service Handbook

6.1

Firmware Updating with Download Jig

In this equipment, it is feasible to update the firmware automatically by connecting the download jig
using the dedicated connector and turning ON the equipment.
The download jig consists of the ROM, in which the program is written, and the jig board.
And two types of the download jigs are available for each type of the firmware.
For updating the firmware, in addition to the current ways such as updating each firmware individually,
the batch update of the firmware of the equipment is available (except the hard disk and the option).
Firmware
Master data
System ROM
Engine ROM
Scanner ROM
Laser ROM
PFC ROM
RADF ROM
Finisher ROM
(Finisher firmware)
Finisher ROM
(Saddle stitcher firmware)
FAX ROM
Inserter ROM
Refer to the following for the details to update with each download jig.
P.6-5 "6.1.1 PWA-DWNLD-350-JIG2 (48 MB) <Master data>"
P.6-11 "6.1.2 PWA-DWNLD-350-JIG2 (48 MB) <System ROM / Engine ROM / Scanner ROM /
Laser ROM / PFC ROM>"
P.6-28 "6.1.4 K-PWA-DLM-320"
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Stored
Hard disk
System control PC board
(SYS board)
* The system firmware
is stored into the hard
disk from the FROM
basic section software
version "V1.04/2.38".
Logic PC board
(LGC board)
Scanning section control
PC board
(SLG board)
Laser control PC board
(PLG board)
Logic PC board
(LGC board)
RADF control PC board
(ADF board)
Finisher control PC board
(MJ-1027/1028)
Saddle stitcher control PC
board
(MJ-1028)
FAX board (GD-1107)
Inserter main board
(MJ-7001)
6 - 3
06/09
Download jig
Individual update
PWA-DWNLD-350-JIG2
(48 MB)
PWA-DWNLD-350-JIG2
(48 MB)
K-PWA-DLM-320
or
PWA-DWNLD-350-JIG2
(48 MB)
K-PWA-DLM-320
or
PWA-DWNLD-350-JIG2
(48 MB)
K-PWA-DLM-320
or
PWA-DWNLD-350-JIG2
(48 MB)
K-PWA-DLM-320
or
PWA-DWNLD-350-JIG2
(48 MB)
K-PWA-DLM-320
K-PWA-DLM-320
K-PWA-DLM-320
K-PWA-DLM-320
K-PWA-DLM-320
e-STUDIO520/523/600/603/720/723/850/853
Batch update
-
PWA-DWNLD-350-JIG2
(48 MB)
-
-
-
-
-
FIRMWARE UPDATING
6