NEC Univerge sv8500 Manual page 2285

[Lights green]
Connection test is completed.
[2] Alarm Information Check
• Check the Alarm Lamps. If the red lamp lights, search the cause of fault and perform the appropriate
operations. Check the system message even when the VS-32(Dual) operates in redundant power con-
figuration.
ALM Lamp Check is available for VS32(Dual) card only.
Note:
ALM lamp always lights red when the VS-32(Dual) operates in single power configuration.
Note:
• Check the system message.
1. Display the system message using DFTD command.
2. See the system message and confirm whether VS-32(Dual) error occurs or not. If an error occurs,
perform the fault repair. ([33-R] IP PKG Warning, [33-S] IP PKG Failure)
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
VOL.2-2032