Interface Isolation; Two-Way Isolation - Huawei S1700 Series Web User Manual

S1700 Managed Series Ethernet Switches
Web User Manual

9.12 Interface Isolation

Isolation features of the interface are designed for security. Network administrators can add
certain interfaces (Common Interface and Trunk port) to isolation group. The isolation
interfaces within these groups cannot communicate directly, and other communications will
not be affected.

9.12.1 Two-way Isolation

The interfaces that enable Two-way Isolation cannot communicate directly; other
communications will not be affected.
Click Security > Interface Isolation > Two-way Isolation, the configuration page is displayed
as follows.
Figure 9-51 Two-way Isolation
Table 9-34 Parameters of Two-way Isolation
Item
Query
Interface Name
Status
Set the parameters of Two-way Isolation for interface
Step 1 Click Security > Interface Isolation.
Step 2 Click Two-way Isolation in Tab.
Step 3 Click the check box of the two-way Isolation parameter on left side, and then click Configure
button to display the following page:
Issue 05 (2012-10-25)
Description
Search the two-way Isolation settings of specified interface in
Interface Name.
Interface number
Enable or disable the interface isolation on appropriate interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Security
162