FR ONT COW L
REMO VAL/I NSTA LLATI ON
UPPE R FRON T COW L
Remove the clips.
Carefully release the tabs of the upper front cowl
from the right/left front cowls, then remove the
upper front cowl.
Installa tion is in the reverse order or remov al.
hooks of
rhe
Allgn
ccwl wirh the
bo ss es of he ad /Jgh t
unir.
RIGHT /LEFT FRONT COWLS
Remove the upper front cowl (page 2-5).
Remove the socket bolts.
Release the bosses of right/left front cowls from the
grommets of headlight unit.
Disconnect the right front turn signal 2P (Light blue)
and left front turn signal 2P (Orange) connectors.
Carefully release the tabs of each front cowl, then
remove the right/left front cowls.
Installation is in the reverse order or removal.
NOTE:
• Route the right/left turn signal wires properly
(page 1-23).
• When installing the right/left front cowls, align
each tab of the cowls.
METER COVER
REMOVAUINSTALLA TION
Remove the headlight (page 20-6).
Remove the screws and meter cover.
Install the meter cover, aligning its tab with the
guide of upper cover.
Tighten the screws securely.
FRAME/BODY PANELS/EXHAUST SYSTEM
- �
Align
',
UPPER FRONT COWL
FRONT COWLS
CONNECTORS
METER COVER
CLIPS
Align
BOSSES
SCREWS
2-5