Gear Position Switch (Crf1000/A) Inspection - Honda CRF1000 Shop Manual

dummyhead dummyhead
LIGHTS/METERS/SWITCHES
SYSTEM INSPECTION
If the gear position switch indicator does not operate
properly, check the combination meter initial operation
(page 22-12).
If the combination meter system inspection is OK,
check the gear position switch line as follows:
Disconnect
connector (page 22-12)
Check for continuity between the wire harness side 32P
(Gray) connector [1] and ground.
CONNECTION:
1st:
Neutral: Light green – ground
2nd:
3rd:
4th:
5th:
6th:
There should be continuity only at the terminals that
correspond to the each gear position (open circuit
inspection).
There should be no continuity at the other terminals
(short circuit inspection).
You must test each of the seven wires in each change
pedal position. Therefore, you need to make 49 tests,
between the wire harness side 32P (Gray) connector
and ground.
If the test result is abnormal, check the gear position
switch (page 22-26).
SWITCH INSPECTION
If the gear position switch system inspection (page 22-
26) is abnormal, check the gear position switch as
following.
Disconnect the gear position switch 8P (Black)
connector (page 22-25).
Check for continuity between the switch side 8P (Black)
connector [1] and ground.
CONNECTION:
1st:
Neutral: Light green – ground
2nd:
3rd:
4th:
5th:
6th:
There should be continuity only at the terminals that
correspond to the each gear position, and there should
be no continuity at the other terminals.
You must test each of the seven wires in each change
pedal position. Therefore, you need to make 49 tests,
between the switch side 8P (Black) connector and
ground.
If the test results is normal, open and/or short circuit in
the combination meter 32P (Gray) and 8P (Black)
connectors.
If the test results are abnormal, replace the gear
position switch (page 22-25).
22-26
the combination meter
Brown – ground
Red – ground
Black/yellow – ground
Yellow – ground
Black/orange – ground
Blue/white – ground
Brown – ground
Red – ground
Black/yellow – ground
Yellow – ground
Black – ground
Blue – ground
[1]
32P (Gray)
Br R
Lg Br
Bl/Y Y Bl/O Bu/W
[1]
Bu Bl Y Bl/Y
Lg
R