Rear Master Cylinder Removal/Disassembly - Honda GoldWing GL1100 Service Manual

Master Cylinder - - - - - - - - - - - - - - - - - - - -
Remove reservoir mounting bolt, then remove the reservoir
and the master cylinder from the frame.
and the two mounting bolts.
a pan under the brake
top of the master cylincler.
Remove the rod eye
Remove the side cover and
Disconnect the line from
Disconnect the reservoir and its hose.
NOTE: You may need apply a small amount of air pressure to
the fluid outlet to get the piston and cup out.
Remove the rod eye, boot,
piston, cup and
and pw;hrod. Remove the
13-19