Display Port-Security Mac-Address Block - H3C MSR Series Command Reference Manual

Field
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
NAS-ID profile

display port-security mac-address block

Use display port-security mac-address block to display information about blocked MAC
addresses.
Syntax
display port-security mac-address block [ interface interface-type interface-number ] [ vlan
vlan-id ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
count: Displays only the count of the blocked MAC addresses.
Usage guidelines
If you do not specify any parameters, this command displays information about all blocked MAC
addresses.
Examples
# (Centralized devices in standalone mode.) Display information about all blocked MAC addresses.
<Sysname> display port-security mac-address block
MAC ADDR
0002-0002-0002
000d-88f8-0577
--- 2 mac address(es) found
Description
Secure MAC address aging type:
•
Periodical—Timer aging only.
•
Inactivity—Inactivity aging feature together with the aging
timer.
Maximum number of secure MAC addresses (or online users) that
port security allows on the port.
Number of secure MAC addresses stored.
Whether the authorization information from the authentication
server (RADIUS server or local device) is ignored:
•
Permitted—Authorization information from the authentication
server takes effect.
•
Ignored—Authorization information from the authentication
server does not take effect.
NAS-ID profile applied to the port.
Port
GE1/0/1
GE1/0/1
---
208
VLAN ID
1
1