Table of Contents
Advertisement
User Manual
Quidway W1003 Series Wireless Access Device
WA1003A-RU Wireless ADSL Access Point
address from the WA1003A-RU, that is, configure the system to be a
DHCP client.
Note:
If you are using this WA1003A-RU to provide Internet access for more than one
computer, you can use these instructions later to change the IP settings for the other
computers. However, you cannot use the same IP address since every computer
must have its own IP address that is unique on the local network.
3.2.1 Configure Windows XP for DHCP
Use the following steps to configure a computer running Windows
XP to be a DHCP client.
1.
From the Start menu on your desktop, go to Settings, then
click on Network Connections.
2.
In the Network Connections window, right-click on LAN
(Local Area Connection), then click Properties.
Chapter 3 Configuring
3-3
Advertisement
Table of Contents
