Configuring The Undo Command To Automatically Match The Higher-Level View; Displaying System Status Messages - Huawei AR1200 Series User Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
l The header message starts and ends with the same character. Enter the first character of the
l If file is specified, save the file containing the header in the root directory of the default
l If a user logs in to the router using SSH1.X, the login header is not displayed during login,
l If a user logs in to the router using SSH2.0, both login and shell headers are displayed.
----End
3.1.5 Configuring the undo Command to Automatically Match the
Higher-Level View
After performing this configuration, if a user runs the undo command when the undo command
is not registered in the current view, the system automatically switches to the view one level up
from the current view and searches for this command there. If the command is found, the
undo command takes effect. If the undo command does not exist in this view, the system
progressively searches higher-level views for the command until reaching the system view. If
not found in the higher-level view, the undo command will not be executed.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
matched upper-view
The undo command is configured to automatically search higher-level views if run in a view
where it is not registered.
By default, the undo command does not automatically search higher-level views.
----End

3.2 Displaying System Status Messages

This section describes how to use display commands to check basic system configurations.
Issue 04 (2012-05-15)
CAUTION
header and press Enter. An interactive interface for setting the header is displayed. Input the
required information and end the header by entering the first character when you are finished.
The system then exits from the interactive interface.
storage medium. If the file is saved in another directory, specify the full path in the file name,
or the file will be inaccessible.
but the shell header is displayed after login.
NOTE
l The matched upper-view command is valid for current login users who run this command.
l Configuring the undo command to automatically match the upper level view is recommended only if
necessary.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Basic Configuration
39