Checking The Configuration; Configuring Local Flow Mirroring; Establishing The Configuration Task; Configuring Traffic Classification Rules - Huawei V100R006C00 Configuration Manual

Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management

7.10.3 Checking the Configuration

Run the following commands to check the previous configuration.
Action
Check information about the
observing port.
Check the configuration of the
mirrored port.
If MAC address mirroring on the VLANIF interface is cancelled, the configuration is successful.

7.11 Configuring Local Flow Mirroring

This section describes how to configure local flow mirroring.

7.11.1 Establishing the Configuration Task

Applicable Environment
When incoming flows passing through the S5700 with the same attribute need to be monitored,
you can configure local flow mirroring if the monitored interface receiving these incoming flows
is located on the same S5700 as the observing port.
Pre-configuration Tasks
None.
Data Preparation
To configure local flow mirroring, you need the following data.
No.
1
2
3

7.11.2 Configuring Traffic Classification Rules

For details on configuring traffic classification rules, see Configuring Complex Traffic
Classification in the Quidway S5700 Series Ethernet Switches Configuration Guide - QoS.
Issue 01 (2011-07-15)
Data
Type and number of the observing port
Type and number of the flow mirroring interface
Names of the traffic classifier, traffic behavior, and traffic policy
NOTE
There is no specified order among the matching rules in a traffic classifier. You can combine these rules.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Command
display observe-port
display port-mirroring
7 Mirroring
85