Optional) Configuring An Ftp Acl - Huawei netengine80e Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp server-source
interface-type interface-number }
The source IP address and source interface of an FTP server is configured.
To log in to the FTP server, you must specify the same source IP address in the
Otherwise, you cannot log in to the FTP server.
Step 3 Run:
ftp
The timeout period of the FTP server is configured.
If the client is idle for the configured time, the connection is removed from the FTP server.
By default, the timeout value is 30 minutes.
----End

6.3.6 (Optional) Configuring an FTP ACL

After an FTP ACL is configured, only the specified clients can access the devicerouter.
Context
When the routerdevice functions as an FTP server, you can configure an ACL to allow the clients
that meet the matching rules to access the FTP server.
Do as follows on the router that serves as the FTP server:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl
The ACL view is displayed.
Step 3 Run:
rule
source-wildcard | any } | time-range time-name | vpn-instance vpn-instance-name ]
The ACL rule is configured.
Issue 02 (2011-09-10)
{ -a ip-address | -i
[ ipv6 ] timeout minutes
acl-number
[ rule-id ] { deny | permit } [ fragment | logging | source { source-ip-address
NOTE
FTP supports only the basic ACL (2000 to 2999).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Managing File System
ftp command.
*
115