Example For Configuring The Batch Distribution Function For An Hgmp Cluster - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management
3.6.6 Example for Configuring the Batch Distribution Function for
an HGMP Cluster
Networking Requirements
As shown in
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
Member-2 and Member-3 are required to download configuration files in batches from the FTP
server.
Figure 3-8 Networking diagram of configuring the batch distribution function for an HGMP
cluster
SFTP Server
Device
Administrator-1
Member-2
Issue 01 (2011-07-15)
return
Figure 3-8, all the Layer 2 switches belong to the same cluster. Administrator-1 is
FTP Server
2.0.0.1/8
2.0.0.2/8
Ethernet0/0/1
1.0.0.2/8
Ethernet0/0/1
Ethernet0/0/1
Member-1
Ethernet0/0/2
Ethernet0/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
Ethernet0/0/3
Ethernet0/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Ethernet0/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
159