Set System Name; Set Time Client - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

set system name

User level: privileged, supervisor.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
string
Example:
P330-N# set system name "P330-1"
*** Set system name ***
system name set
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

set time client

User level: privileged, supervisor.
Use the set time client command to enable or disable the periodic network
time acquisition by the switch from the network time server (SNTP or TIME
protocol).
The syntax for this command is:
set time client {enable|disable}
enable
disable
Example:
P330-N# set time client enable
Time client mode enabled
96
• The system name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
Enable periodic network time acquisition
Disable periodic network time acquisition
Avaya P330 Reference Guide