Ping - Avaya P330 Reference Manual

Use the no ip unicast cache command to return to the default value.
The syntax for this command is:
[no] ip unicast cache update-timeout interval
Example:
Router-N(configure)# ip unicast cache update-timeout 600
Done!

ping

User level: user, privileged, supervisor
Use the ping command to send ICMP echo request packets to another node on the
network.
You can use this command via the master switch only.
The command is executed until you
The syntax for this command is:
ping <host> [<interval> [<size> [<timeout> [<source
address>]]]]]
host
interval
size
timeout
source
address
Avaya P330 Reference Guide
Host IP address/Internet address of route destination. If missing
then the last host IP is used.
Interval between ping commands in seconds (1 to 256)
Size of packet in bytes (22 to 66500)
Timeout in seconds (1 to 10)
IP address of one of the router interfaces
Chapter 3 Avaya P330 Layer 3 CLI Commands
189