Real-Slb-Server Hc Timeout; Real-Slb-Server Weight; Show Real-Slb-Server - Avaya P330 Reference Manual

real-slb-server hc timeout

User level: privileged, supervisor
Use the hc timeout command to set the amount of time after which the real SLB
server is considered to have "timed out". Use the no form of this command to set
the time-out to the default value (1 second).
The syntax for this command is:
[no] hc timeout <time-sec>
time-sec
Example:
Router-N(configure)# hc timeout 10

real-slb-server weight

User level: privileged, supervisor
Use the weight command to set a weight for the real SLB server. Use the no
form of this command to set the weight of the real SLB server to the default (10).
The syntax for this command is:
[no] weight <weight>
weight
Example:
Router-N(configure)# weight 5

show real-slb-server

User level: user, privileged, supervisor
Use the show real-slb-server command to display all real servers using SLB.
The syntax for this command is:
show real-slb-server [<server-ip>]
server-ip
Example:
Router-N> show real-slb-server 10.1.1.2
Avaya P330 Reference Guide
Chapter 4
The amount of time in seconds, an integer.
The weight of the real server, an integer from 1 to 256.
The IP address of the real server.
Load Balancing CLI Commands
287