Show Ip Access-Group; Show Ip Access-List Details - Avaya P330 Reference Manual

show ip access-group

User level: privileged, supervisor.
Use the show ip access-group command to display the active policy-list
number.
This command applies to the P334T-ML only when it is in device mode
"Layer2".
The syntax for this command is:
show ip access-group <policy-list-number>
policy-
list-
number
Example:
P330-1(super)# show ip access group 1011
access-group 101

show ip access-list details

User level: user, privileged, supervisor
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the show ip access-lists details command to view complete data of a
policy list (including DSCP and composite operation tables).
The syntax for this command is:
show ip access-list-details <policy-list-number>
policy-
list-
number
Avaya P330 Reference Guide
A valid id number for a policy list currently defined for the module.
A valid id number for a policy list currently defined for the module
(100 to 199, 0 is the default list)
Chapter 2 Avaya P330 Layer 2 CLI Commands
111