Show Ip Route Best-Match; Show Ip Route Static - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands

show ip route best-match

User level: user, privileged, supervisor
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
dst addr
Example:
Router-N> show ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network
--------------- ------------------------------------------------
199.93.0.0

show ip route static

User level: privileged, supervisor.
Use the show ip static route command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
ip-address
mask
Example:
Router-N> sh ip route static
Showing 34 rows
Network
------------- ------------ --------------- --------------- ---- ---- -----
10.0.8.0
135.0.0.0
135.64.0.0
149.49.0.0
149.49.2.0
216
IP address
Mask Interface
255.255.0.0 e-135new
The IP address of the routes
The ip mask of the routes.
Mask Interface
255.255.255.0 e-36
255.0.0.0 e-135new
255.255.0.0 e-135
255.255.0.0 trial
255.255.255.0 n/a
Next-Hop Cost TTL
135.64.76.1 1 n/a
Next-Hop Cost Pref Active
149.49.36.11 1 high
135.64.76.1 1 high
135.87.164.1 1 high
10.10.254.253 1 low
v-Route-FW 1 1 high
Avaya P330 Reference Guide
Source
-----
STAT-HI
Yes
Yes
No
Yes
Yes