Lb Control Slb; Show Lb Control; Show Lb Real-Ar-Server Cache 10.1.1.1 - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands

lb control slb

User level: privileged, supervisor
Use the lb control slb command to enable Server Load Balancing (SLB). Use
the no form of this command to disable SLB.
The syntax for this command is:
[no] lb control slb
Example:
Router-N(configure)#

show lb control

User level: user, privileged, supervisor
Use the show lb control command to display the LB control status. Any
configured load balancing application, administrative status, and precedence level
is shown.
The syntax for this command is:
show lb control
Example:
Router-N>
show lb real-ar-server cache
Use the show lb real-ar-server cache command to display the LB real AR
server cache.
The syntax for this command is:
show lb real-ar-server cache [server]
server
Example:
Router-N>
264
lb control slb
show lb control
The IP address of the real server.

show lb real-ar-server cache 10.1.1.1

Avaya P330 Reference Guide