set system location
Use the set system location command to set the mib2 system location MIB
variable.
The syntax for this command is:
set system location [< location string>]
string
set system name
Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name [<name string>]
string
set system contact
Use the set system contact command to set mib2 system contact MIB
variable.
The syntax for this command is:
set system contact [<contact string>]
string
set device-mode
Use the set device-mode command to change the Basic Mode of Operation of
the P330-ML switches between Router and Layer 2 modes.
Avaya P334T-ML User's Guidee
Location name. The location name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. "Operations Floor".
System name. The system name is cleared if this field is left blank. A
string of 2 words or more must be type in quotation marks –
e.g. "Backbone Stack".
Contact person. The contact person field is cleared if this field is
blank. A string of 2 words or more must be type in quotation
marks – e.g. "Yigdal Naouri".
Chapter 6
CLI – Layer 2
107