Show Allowed Managers Table; Show Arp-Aging-Interval - Avaya P330 Reference Manual

show allowed managers table

User level: user, privileged, supervisor
Use the show allowed managers table to display the list of the twenty
possible allowed managers IP addresses.
The syntax for this command is:
show allowed managers table
Example:
P330-1(super)# show allowed managers table
1 ) 149.49.32.134
2 ) Not Used
3 ) Not Used
4 ) Not Used
5 ) Not Used
6 ) Not Used
7 ) Not Used
8 ) Not Used
9 ) Not Used
10) Not Used
11) Not Used
12) Not Used
13) Not Used
14) Not Used
15) Not Used
16) Not Used
17) Not Used
18) Not Used
19) Not Used
20) Not Used

show arp-aging-interval

User level: user, privileged, supervisor
Use the show arp-aging-interval command to display the ARP table aging
interval for table entries.
The syntax for this command is:
show arp-aging-interval
Example:
P330-N>show arp-aging-interval
ARP table aging interval was set to 10 minutes.
Avaya P330 Reference Guide
Chapter 2 Avaya P330 Layer 2 CLI Commands
101