Chapter 2
Avaya P330 Layer 2 CLI Commands
copy running-config tftp
User level: privileged, supervisor.
This command applies to the P334T-ML only when it is in "Layer2"
device mode.
Use the copy running-config tftp command to upload the policy
configuration to a TFTP server.
The syntax for this command is:
copy running-config tftp <filename> <ip>
filename
ip
Example (for Windows):
P330-N# copy running-config tftp c:\p330\startup.cfg
149.49.100.41
Example: (for Unix):
P330-N# copy running-config tftp /folder/p330/startup.cfg
149.49.100.41
copy stack-config tftp
User level: privileged, supervisor.
Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
Create the file into which you wish to upload the stack-level parameters prior to
executing this command.
The syntax for this command is:
copy stack-config tftp <filename> <ip>
filename
ip
16
Destination file name in the tftp server (full path).
The ip address of the tftp server.
The file name (full path)
The IP address of the TFTP server
Avaya P330 Reference Guide