Configure; Copy Running-Config Startup-Config; Copy Running-Config Tftp - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands

configure

User level: privileged, supervisor.
Use the configure command to enter configure mode.
The syntax for this command is:
configure
Example:
P330-1(super)# configure
Router-N(configure)#

copy running-config startup-config

User level: privileged, supervisor.
Use the copy running-config startup-config command to save the policy
and router configurations to the startup configuration file in the NVRAM.
The syntax for this command is:
copy running-config startup-config
Example:
Router-N(super)# copy running-config startup-config

copy running-config tftp

User level: privileged, supervisor.
Use the copy running-config tftp command to upload the active policy and
router configurations to a TFTP server.
The syntax for this command is:
copy running-config tftp <filename> <ip>
filename
ip
Example:
Router-N(super)# copy running-config tftp
c:\p330\startup.cfg 149.49.100.41
168
Destination file name in the tftp server (full path).
The ip address of the tftp server.
Avaya P330 Reference Guide