Set Ip Route - Avaya P330 Reference Manual

value
Example:
P330-N# set internal buffering 1 max
Done.

set ip route

User level: privileged, supervisor.
Use the set ip route command to add a route to the IP routing table. You can
configure from 1 to 10 default static gateways for a P330 switch.
The syntax for this command is:
set ip route <destination> <gateway>
destination
gateway
Example:
This example shows how to add a default route to the IP routing table:
P330-N# set ip route 0.0.0.0 192.168.1.1
destination = 0.0.0.0
ROUTE NET TABLE
destination
------------------------------------------------------------------------
0.0.0.0
127.1.1.0
------------------------------------------------------------------------
ROUTE HOST TABLE
destination
------------------------------------------------------------------------
127.0.0.1
10.10.10.10
------------------------------------------------------------------------
Avaya P330 Reference Guide
max - sets the internal receive buffer to its maximum size
med - sets the internal receive buffer capacity dynamically
min - sets the internal receive buffer to its minimum size
Default is min
IP address of the network, or specific host to be added
IP address of the router
gateway = 192.168.1.1
gateway
192.168.1.1
127.1.1.1
gateway
127.0.0.1
192.168.1.1
Chapter 2 Avaya P330 Layer 2 CLI Commands
flags Refcnt Use
1 1 3199
1 8 7606
flags Refcnt Use
5 2 131
7 0 0
Interface
se0
se1
Interface
lo0
se0
55