Set Spantree Forward-Delay; Set Spantree Hello-Time - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
The syntax for this command is:
set spantree enable
Example:
P330-N# set spantree enable
bridge spanning tree enabled.

set spantree forward-delay

User level: privileged, supervisor.
Use the set spantree forward-delay command to set the bridge forward
delay time parameter.
The syntax for this command is:
set spantree forward-delay <time>
forward -
delay
Example:
P330-N# set spantree forward-delay 15
bridge forward delay set to 15.

set spantree hello-time

User level: privileged, supervisor.
Use the set spantree hello-time command to set the bridge hello time
parameter.
The syntax for this command is:
set spantree hello-time <time>
hello-
time
Example:
P330-N# set spantree hello-time 2
bridge hello time set to 2.
92
The time that is used when transferring the port to forwarding state.
Value range is 4-30 and must exceed (Bridge Max Age/2).
Recomended value is 15 seconds.
The time interval (in seconds) between the generation of
configuration BPDUs by the Root. Value ranges between 1 to 10 and
must not exceed (Bridge-Max-Age/2) - 1.
The recommended value is 2 sec.
Avaya P330 Reference Guide