Avaya P330 Reference Manual page 170

Chapter 2 Avaya P330 Layer 2 CLI Commands
Output fields:
Field
Spanning tree
Designated
Root
Designated
Root Priority
Designated
Root Cost
Designated
Root Port
Root Max Age
Hello Time
Root Forward
Delay
Bridge ID
MAC ADDR
Bridge ID
Priority
Bridge Max
Age
Bridge Hello
Time
Bridge
Forward Delay
Tx Hold Count
Soanning Tree
Version
152
Description
Status of whether Spanning-Tree Protocol is enabled or
disabled
MAC address of the designated spanning-tree root bridge
Priority of the designated root bridge
Total path cost to reach the root
Port through which the root bridge can be reached (shown only
on nonroot bridges)
Amount of time a BPDU packet should be considered valid
Number of times the root bridge sends BPDUs
This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when
moving towards the Forwarding state.
Bridge MAC address used in the sent BPDUs
Bridge priority
The value that all bridges use for MaxAge when this bridge is
acting as the root.
The value that all bridges use for HelloTime when this bridge is
acting as the root.
The value that all bridges use for ForwardDelay when this
bridge is acting as the root.
The value used by the Port Transmit state machine to limit the
maximum transmission rate.
The version of Spanning Tree Protocol the bridge is currently
running
Avaya P330 Reference Guide