Rmon2 Protocol-Dir; Router Ospf - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands
The syntax for this command is:
[no]rmon2 auto-learn
Example:
Router-N(configure)# rmon2 auto-learn
Done!

rmon2 protocol-dir

User level: privileged, supervisor.
If you are at the "privileged" level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
This command applies to the P333R only.
Use the rmon2 protocol-dir to add a protocol to the protocol directory.
The syntax for this command is:
rmon2 protocol-dir UDP|TCP <Port #> [<description> [<owner>]]
Example:
Router-N(configure)# rmon2 protocol-dir UDP 345
Router-N(configure)# rmon2 protocol-dir UDP 345 "my
description"
Router-N(configure)# rmon2 protocol-dir UDP 345
"description" "I am the owner"
Done!
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

router ospf

User level: privileged, supervisor.
If you are at the "privileged" level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter interface mode.
Use the router ospf command to enable the OSPF protocol on the system and
enter the "router ospf" context.
Use the no router ospf command to disable the OSPF one the system.
194 Avaya P330 Reference Guide