Chapter 4
Load Balancing CLI Commands
rsg backup
User level: privileged, supervisor
Use the backup command to set a backup real server group. Use the no form of
this command to remove a backup real server group.
The syntax for this command is:
[no] backup <backup-group>
backup-group
Example:
Router-N(configure)# backup 2
rsg real-ar-server Command
User level: privileged, supervisor
Use the real-ar-server command to map a real AR server to the real server
group as well as to set the real server to use Application Redirection. Use the no
form of this command to remove a real AR server from the real-server group.
The syntax for this command is:
[no] real-ar-server <server-ip>
server-ip
Example:
Router-N(configure)# real-ar-server 10.1.1.2
300
The name (up to 16 characters) or ID (an integer from 1 to
1024) of the backup real server group.
The IP address of the real server.
Avaya P330 Reference Guide