Real-Slb-Server Backup; Real-Slb-Server Direct-Server-Return; Real-Slb-Server Hc Failure-Retries - Avaya P330 Reference Manual

real-slb-server backup

User level: privileged, supervisor
Use the backup command to set a backup real SLB server. Use the no form of
this command to remove a backup real SLB server.
The syntax for this command is:
[no] backup <r-slb-srvr-ip>
r-slb-srvr-ip
Example:
Router-N(configure)# backup 10.1.1.2

real-slb-server direct-server-return

User level: privileged, supervisor
Use the direct-server-return command to notify P333R-LB that a real SLB
server is configured in direct server return (triangulation) mode. Use the no form
of this command to notify P333R-LB that a real SLB server is not configured in direct
server return (triangulation) mode.
The syntax for this command is:
[no] direct-server-return
Example:
Router-N(configure)# direct-server-return

real-slb-server hc failure-retries

User level: privileged, supervisor
Use the hc failure-retries command to set the number of times the real SLB
server should be health-checked before determining failure. Use the no form of
this command to return the failure-retries (the number of times the real SLB server
should be health-checked before determining failure) to the default (4).
The syntax for this command is:Syntax
[no] hc failure-retries <failure-retries>
failure-retries
Avaya P330 Reference Guide
Chapter 4
The IP address of the backup real SLB server.
The number of times, an integer from 1 to 32.
Load Balancing CLI Commands
285