Show Port Channel - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

show port channel

User level: user, privileged, supervisor
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]] [info]
mod_num
(Optional)
port_num
(Optional)
info (Optional)
Example:
P330-N>show port channel
Port
------ --------------- ---------------- ----------------
1/1
1/2
1/3
1/4
1/5
1/6
1/7
1/8
P330-N>show port channel 3/3 info
Port
------ ------ ------- ----- --------- -------- --------
1/1
128
Number of the switch. If you do not specify a number, the
modules on all the switches are shown.
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Display port information
Channel Status
on
on
off
off
on
on
off
on
Speed Duplex Vlan
10 half 1
Channel Name
MEIR
MEIR
my-channel
my-channel
my-channel
Port Trunk
Priority status
0 off
Channel Id
1/101
1/101
1/102
1/102
1/102
Vlan
Binding
static
Avaya P330 Reference Guide