Set Spantree Tx-Hold-Count; Set Spantree Version - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

set spantree tx-hold-count

User level: privileged, supervisor.
Use the set spantree tx-hold-count command to limit the maximum
number of BPDUs transmitted during a hello-time period.
The syntax for this command is:
set spantree tx-hold-count <rate>
rate
Example:
P330-N# set spantree tx-hold-count 3
tx hold count is set to 3.

set spantree version

User level: user, privileged, supervisor
Use the set spantree version command to set the rapid spanning tree state
machine to work as "STP compatible".
The syntax for this command is:
set spantree version <version>
version
Example:
P330-N# set spantree version rapid-spanning-tree
Spanning tree version is set to rapid spanning tree.
94
Value between 1 to 10; recommended value is 3
common-spanning-tree — compatible with ieee802.1D standard.
rapid-spanning-tree — compatible with ieee802.1W standard
Avaya P330 Reference Guide