Chapter 3
Avaya P330 Layer 3 CLI Commands
Example:
Router-N# fragment timeout 30
help
User level: user, privileged, supervisor
Use the help command to obtain help on CLI commands.
The syntax for this command is:
help <command>
command
Example:
Router-N> help arp
Arp commands:
-------------------------------------------------------------------------
Syntax : [no] arp <ip addr> <mac addr>
Examples:
arp timeout
hostname
User level: privileged, supervisor.
Use the hostname command to change the system prompt used for the router
Use the no hostname command to return the system prompt to its default.
This command does not change the system prompt of the switch. To change the
system prompt of the switch, use the host name command in the Layer 2 tree.
The syntax for this command is:
[no] hostname [<hostname_string>]
hostname_string
174
A specific CLI command or group of commands
<ip addr>
- IP address
<mac addr>
- MAC address
arp 137.22.33.44 00:11:22:33:44:55
no arp 137.22.33.55
The string to be used as the hostname (up to 20 characters).
If you do not enter a string, the current hostname is
displayed.
Set the ARP timeout
Avaya P330 Reference Guide