Reset Stack; Reset Wan; Retstatus - Avaya P330 Reference Manual

Example:
P330-N# reset mgp 1

reset stack

User level: privileged, supervisor.
Use the reset stack command to perform a hardware reset of the entire stack.
The syntax for this command is:
reset stack

reset wan

User level: user, privileged, supervisor
Use the reset wan command to perform a software reset in the X330 WAN Access
Router Module.
The syntax for this command is:
reset wan [module][bank-a]
To reset a WAN module residing on switch 2:
module
bank-a

retstatus

User level: user, privileged, supervisor
Use the retstatus to display the return status of the previously executed
command.
The syntax for this command is:
retstatus
Example:
P330-N# retstatus
Succeeded
Avaya P330 Reference Guide
Optional - the module number where the WAN module to be
reset resides.
Optional - boot the WAN module from bank-a after reset.
Chapter 2 Avaya P330 Layer 2 CLI Commands
37