set module name
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Creates the name for a module. Omitting the <mod-name> variable clears
the module name.
set module name <mod-num> [<mod-name>]
Table 17-2. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module whose name is to be
cleared or set.
<mod-name>
Specifies the name of the module. If the module name is not
specified, any previous name for the module is cleared.
The following example creates the name of the module in slot 3.
(configure)# set module name 3 "MIS dept module"
Module 3 name set
P550R, P580, P880, and P882.
Module
17-3