Show License - Avaya P330 Reference Manual

!#
!#Set PPP management parameters
!#
!#set interface ppp 0.0.0.0 0.0.0.0
--type q to quit or space key to continue--
#set interface ppp disable
set ppp authentication incoming none
set ppp incoming timeout 0
set ppp baud-rate 38400
!#
!#Set radius management parameters
!#
set radius authentication disable
set radius authentication server 0.0.0.0 primary
set radius authentication server 0.0.0.0 secondary
set radius authentication retry-number 4
set radius authentication retry-time 5
set radius authentication udp-port 1812
!#
!# set intelligent-multicast parameters
!#
set intelligent-multicast disable
set intelligent-multicast client-port-pruning time 600
set intelligent-multicast router-port-pruning time 1800
set intelligent-multicast group-filtering-delay time 10

show license

User level: user, privileged, supervisor
Use the show license command to display the current licenses installed on the
stack.
The syntax for this command is:
show license
Example:
P330-N>show license
Mod
--- ------------------- ----------------------------- ---------- ---------
1
Avaya P330 Reference Guide
Application
smon 0000 0000 0000 0000 0000 0000
Chapter 2 Avaya P330 Layer 2 CLI Commands
License Key State Feature Flag
licensed 1
121