Chapter 3
Avaya P330 Layer 3 CLI Commands
Example:
Router-N> show ip interface brief
Showing 1 Interfaces
Interface
-------------------- --------------- --------------- --------------------
net
show ip ospf
User level: user, privileged, supervisor
Use the show ip opsf command to displays general information about OSPF
routing.
The syntax for this command is:
show ip ospf
Example:
Router-N> show ip ospf
Routing Process OSPF with ID 149.49.75.222
Number of areas in this router is 1
Area 0.0.0.0
Number of Interfaces in this area 0
SPF algorithm executed 1 times
SPF hold time is 3 sec
show ip ospf database
User level: user, privileged, supervisor
Displays lists of information related to the OSPF database for a specific router.
The syntax for this command is:
show ip ospf database [<ls type>]
ls-types:
asbr-summary
router
212
Address
149.49.54.56
255.255.255.0
Displays information only about the autonomous
system boundary router summary LSAs. Optional.
Displays information only about the router LSAs.
Optional.
Mask
Status
up
Avaya P330 Reference Guide