virtual-server virtual-slb-service persistency time
User level: privileged, supervisor
Use the persistency time command to set the persistency time for the virtual
SLB service. Use the no form of this command to set the persistency aging time of
the virtual SLB service to the default (3600 seconds).
The syntax for this command is:
[no] persistency time <time>
time
Example:
Router-N(configure)#
virtual-server virtual-slb-service persistency wildcard
User level: privileged, supervisor
Use the persistency wildcard command to set the persistency wildcard for
the virtual SLB service. The persistency wildcard command extends the
range of client IP addresses to those which the persistency applies. Use the no
form of this command to set the persistency wildcard for the virtual SLB service to
the default (0.0.0.0).
The syntax for this command is:
[no] persistency wildcard <wildcard>
wildcard
Example:
Router-N(configure)# persistency wildcard 0.0.15.255
Avaya P330 Reference Guide
The time in seconds, an integer.
persistency time 3000
The client IP network wildcard.
Chapter 4
Load Balancing CLI Commands
329