Chapter 4
Load Balancing CLI Commands
show ar-filter details
User level: user, privileged, supervisor
Use the show ar-filter details command to display the full details of all
AR filters.
The syntax for this command is:
show ar-filter details [<id>]
id
Example:
Router-N>
LB Control Commands
This section illustrates the lb control commands.
lb control ar
User level: privileged, supervisor
Use the lb control ar command to enable Application Redirection (AR). Use
the no form of this command to disable AR.
The syntax for this command is:
[no] lb control ar
Example:
Router-N(configure)#
262
The identification number of the AR filter, an integer from 1 to 1024.
show ar-filter details 1
lb control ar
Avaya P330 Reference Guide