Real-Ar-Server Backup; Real-Ar-Server Hc Failure-Retries; Real-Ar-Server Hc Interval - Avaya P330 Reference Manual

real-ar-server backup

User level: privileged, supervisor
Use the backup command to set a backup real AR server. Use the no form of this
command to remove a backup real AR server.
The syntax for this command is:
[no] backup <r-ar-srvr-ip>
r-ar-srvr-ip
Example:
Router-N(configure)# backup 10.1.1.2

real-ar-server hc failure-retries

User level: privileged, supervisor
Use the hc failure-retries command to set the number of times the real AR
server should be health-checked before determining failure. Use the no form of
this command to return the failure-retries (the number of times the real AR server
should be health-checked before determining failure) to the default (4).
The syntax for this command is:
[no] hc failure-retries <failure-retries>
failure-retries
Example:
Router-N(configure)# hc failure-retries 10

real-ar-server hc interval

User level: privileged, supervisor
Use the hc interval command to set the interval between health-checks. Use
the no form of this command to return the interval between health-checks to the
default (5 seconds).
The syntax for this command is:
[no] hc interval <time-sec>
time-sec
Avaya P330 Reference Guide
Chapter 4
The IP address of the backup real AR server.
The number of times, an integer from 1 to 32.
The amount of time in seconds, an integer from 1 to 36.
Load Balancing CLI Commands
281