Chapter 4
Load Balancing CLI Commands
Example:
Router-N(configure)# persistency wildcard 0.0.15.255
virtual-ar-service rsg
User level: privileged, supervisor
Use the rsg command to map a real server group to the virtual AR service. Use
the no form of this command to delete the mapping of a real server group from the
virtual AR service.
The syntax for this command is:
[no] rsg <rsg>
rsg
Example:
Router-N(configure)# rsg rsg1
virtual-ar-service simulate-hash
User level: privileged, supervisor
Use the simulate-hash command to predict which Real Server is selected based
on packet IP address.
The syntax for this command is:
simulate-hash <src-IP>
src-IP
Example:
Router-N(configure)# simulate-hash 193.170.1.1
312
The name of the real server group, either a string of up to 32
characters (rsg-name), or an integer from 1 to 1024 (rsg-id).
The source IP address of the device.
Avaya P330 Reference Guide