Show Port Vlan-Binding-Mode - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
port
(Optional)
Example:
P330-N>show port trap 4/1
Port 4/1 up/down trap is disabled

show port vlan-binding-mode

User level: user, privileged, supervisor
Use the show port-vlan-binding command to display port vlan binding mode
information.
The syntax for this command is:
show port vlan-binding-mode [module[/port]]
module
port
(Optional)
Example:
P330-N>show port vlan-binding-mode
port 2/1 is statically bound
port 2/2 is statically bound
port 2/3 is statically bound
port 2/4 is statically bound
port 2/5 is statically bound
port 2/6 is statically bound
port 2/7 is statically bound
port 2/8 is statically bound
port 2/9 is statically bound
port 2/10 is statically bound
138
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Number of the switch. If you do not specify a number, the ports
on all the switches are shown.
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Avaya P330 Reference Guide