Show Ip Access-List-Summary; Show Ip Route - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

show ip access-list-summary

User level: user, privileged, supervisor
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the show ip access-list-summary command to display a summary of
policy lists.
The syntax for this command is:
show ip access-list-summary
Example:
P330-N>show ip access-list-summary
The policy lists summary:
default List (0)

show ip route

User level: user, privileged, supervisor
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
P330-N>show ip route
Destination
-------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
114
Gateway
-------------
149.49.54.1
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Avaya P330 Reference Guide