Chapter 3
Avaya P330 Layer 3 CLI Commands
show rmon2 state
User level: user, privileged, supervisor
This command applies to the P333R only.
Use the show rmon2 state command to show the status of the rmon2
application.
The syntax for this command is:
show rmon2 state
Example:
Router-N# show rmon2 state
RMON2 15 in MATRIX state
show rmon2 protocol-dist
Use the show rmon2 protocol-dist command to display the RMON2
protocol distribution information.
The syntax for this command is:
show rmon2 protocol-dist [UDP|TCP <Port #>]
UDP
TCP
Port #
226
UDP protocol
TCP protocol
Port
Avaya P330 Reference Guide