Set Logout; Set Mac-Aging - Avaya P330 Reference Manual

set logout

User level: privileged, supervisor.
Use the set logout command to set the time in minutes before the system
automatically disconnects an idle session.
The syntax for this command is:
set logout [timeout in minutes]
timeout in
minutes
Examples:
• To set the time until the system disconnects an idle session automatically to 20
minutes:
P330-N# set logout 20
Sessions will be automatically logged out after 20 minutes
of idle time.
• To disable the automatic disconnection of idle sessions:
P330-N# set logout 0
Sessions will not be automatically logged out.

set mac-aging

User level: privileged, supervisor.
This command is available on the P330-ML switches only.
Use the set mac-aging command to enable or disable the MAC aging function.
The syntax for this command is:
Set mac-aging <status>
status
Examples:
P330-N# set mac-aging enable
mac aging is enabled.
Avaya P330 Reference Guide
Time until the system automatically disconnects an idle
session.
• Setting the value to 0 disables the automatic disconnection
of idle sessions
• Default value is 15 minutes
enable / disable
Chapter 2 Avaya P330 Layer 2 CLI Commands
57