Chapter 2
Avaya P330 Layer 2 CLI Commands
Example:
P330-N>show time parameters
Client status: Enabled
Current time : L:00:57:19 01 JAN 1970 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
Time-Server
Time acquired from Time-Server: 0.0.0.0
Time protocol set to
show timeout
User level: user, privileged, supervisor
Use the show timeout command to display the amount of time the CLI can
remain idle before timing out in minutes. If the result is 0, there is no timeout limit.
The default is 15 minutes.
The syntax for this command is:
show timeout
Example:
P330-N>show timeout
CLI timeout is 10 minutes
show timezone
User level: user, privileged, supervisor
Use the show timezone command to display the current P330 time zone.
The syntax for this command is:
show timezone
Example:
P330-N>show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
156
: 0.0.0.0
(I.e. broadcast address)
: TIME protcol
Avaya P330 Reference Guide